AXLES
Steel stub axles used on Quicksilver Models.
All of the axles listed here are machined from 4130 cold rolled steel rod. Typically all drilled holes are for a 3/16″ diameter bolt or pin. Threaded axles are 5/8″ fine thread. The 5/8″ nut or washer is NOT part of the axle and should be ordered seperatly Length of thread is 3/4″ from end of axle. Axles with key slots will accept a 3/16″ key. Keys are provided with “keyed” axles. Usually the key is used with hydraulic brake systems. The description of the axle is the ‘Diameter (5/8″) X the overall length. Custom length axles can be supplied. WHEEL PANTS… If your application is using wheel pants then you will require the outboard end of the axle to have a 5/16″ threaded hole in the end of the rod (like a threaded gun barrel). This allows mounting of the wheel pant.
Axles – Drilled
Drilled (only) axles are used with wheels that are not using brakes OR wheels using band type brakes. One end the 3/16″ hole is 1/4″ from end of axle. This hole accepts the Q20031 collar. The opposite end accepts the appropriate Aluminum Sleeve W430 or W430-2S
Name | SKU | Description | Quantity | Price | Add to cart |
|---|---|---|---|---|---|
5/8″ Diameter Steel axle. 5-1/8″ Long Used for QS wheel… | $28.00 | ||||
5/8″ Diameter Steel axle. 5-3/8″ Long Used for QS wheel… | $28.00 |
Axles – Threaded
Drilled (only) axles are used with wheels that are not using brakes OR wheels using band type brakes. One end the 3/16″ hole is 1/4″ from end of axle. This hole accepts the Q20031 collar. The opposite end accepts the appropriate Aluminum Sleeve W430 or W430-2S
Name | SKU | Description | Quantity | Price | Add to Cart |
|---|---|---|---|---|---|
This axle is used in conjuntion with Aluminium Sleeve W430 | $34.00 | ||||
$34.00 | |||||
This axle is used in conjuntion with Alum Sleeve W430 | $34.00 | ||||
$34.00 | |||||
Drilled, threaded, and C-90 torque flange is welded onto axle. Flange is provided with C-90 brake system. | $42.00 |
Axles – Threaded & Keyed
Drilled (only) axles are used with wheels that are not using brakes OR wheels using band type brakes. One end the 3/16″ hole is 1/4″ from end of axle. This hole accepts the Q20031 collar. The opposite end accepts the appropriate Aluminum Sleeve W430 or W430-2S
Name | SKU | Description | Quantity | Price | Add to cart |
|---|---|---|---|---|---|
5/8″ Diameter Steel axle. 5-1/8″ Long Used for QS wheel… | $28.00 | ||||
5/8″ Diameter Steel axle. 5-3/8″ Long Used for QS wheel… | $28.00 |